师资队伍
首页-师资队伍-教工名录
 姓名:  韩远飞
 职称:  助理研究员
 博导/硕导:  硕导
 所属二级机构:   复合材料研究所
 通讯地址:  上海市东川路800号材料学院D楼408室
 邮编:  200240
 E-mail:  hyuf1@sjtu.edu.cn
 联系电话:  
从事专业: 高性能钛基复合材料,金属激光增材制造
学习与工作简历: 中共党员,自2003年至2013年先后取得材料科学与计算机科学双学士学位、西北工业大学工学硕士学位,工学博士学位。2012年3月国家公派博士赴澳大利亚莫纳什大学国家轻金属中心留学,2013年7月于上海交通大学材料学院/金属基复合材料国家重点实验室博士后,2015年12月上海交通大学材料科学与工程学院助理研究员。

 

研究方向一 高性能钛及钛基复合材料设计制备与先进加工工
研究方向二 金属构件的激光增材制造
研究情况

  致力于发展难变形钛基复合材料制备与先进加工技术,以及颗粒增强钛基复合材料的仿生构型,制备强韧兼备、结构功能一体化的钛基复合材料;结合金属激光增材制造(3D打印),开展高性能致密金属零件激光制造技术,形成完整的钛基复合材料激光快速成形新工艺与新技术。

  主持“航天科工支撑基金(2017)”、“上海科技创新行动计划(2017)”、“国家青年科学基金(2015)”、“中国博士后科学基金特别资助(2015)”、“中国博士后科学基金一等资助(2014)”、“上海市博士后科研资助计划项目(2014)”、“凝固国家重点实验室开放基金(2016)”、“教育部博士研究生学术新人奖基金”和“西北工业大学博士论文创新基金”等项目14项;作为技术骨干参与国家“973计划”2项,国家自然科学基金重点项目1项(2016),国家自然科学基金面上项目3项,总装预研项目1项(2017),上海市学术带头人计划1项以及其他项目3项;目前在J Alloys Compd, Mater Design,Mater Sci Eng A,Mater Lett,Metall Mater Trans A等期刊以第1作者及通讯作者发表SCI论文近40余篇,其中SCI论文他引次数超过460次,H因子13,应邀参加国际国内学术会议20余次,邀请报告6次,担任分会主席3次,研究成果先后被国际知名学者在其论文中转载和评价50余次。

讲授主要课程
教学研究
代表性论文、论著

  1. Xianglong Sun, Hong Li, Yuanfei Han*, Jiuxiao Li, Jianwei Mao, Weijie Lu*,Compressive response and microstructural evolution of bimodal sized Particulates reinforced (TiB+La2O3)/Ti composites,Journal of Alloys and Compounds,2018, 732: 524-535,

  2. Juan Xiang, Yuanfei Han*, Jiuxiao Li, Peikun Qiu, Xianglong Sun, Weijie Lu*. Microstructure characteristics of ECAP-processed (TiB+La2O3)/Ti-6Al-4V composites. Journal of Alloys and Compounds, 2017, 726: 57-66.

  3. Xianglong Sun, Yuanfei Han*, Sanchen Cao, Peikun Qiu, Weijie Lu*. Rapid in-situ reaction synthesis of novel TiC and carbon nanotubes reinforced titanium matrix composites. Journal of Materials Science & Technology, 2017, 33(10): 1165-1171.

  4. Peikun Qiu, Hong Li, Xianglong Sun, Yuanfei Han*, Guangfa Huang, Weijie Lu*, Reinforcements stimulated dynamic recrystallization behavior and tensile properties of extruded (TiB +TiC+La2O3)/Ti6Al4V composites, Journal of Alloys and Compounds, 2017, 699: 874-881,

  5. Hongqiang Duan, Yuanfei Han*, Weijie Lu*, Liqiang Wang, Jianwei Mao, Di Zhang. Configuration design and fabrication of laminated titanium matrix composites. Materials & Design, 2016, 99: 219-224.

  6. Guangfa Huang, Xianglong Guo, Yuanfei Han*, Liqiang Wang, Weijie Lu*. Effect of extrusion dies angle on the microstructure and properties of (TiB+TiC)/Ti6Al4V in situ titanium matrix composite, Materials Science and Engineering A, 2016, 667: 317-325.

  7. Yuanfei Han, Jiuxiao Li, Guangfa Huang, Yuting Lv, Xi Shao, Xianglong Guo, Weijie Lu*. Effect of the number of ECAP passes on microstructure and mechanical properties of titanium matrix composite, Materials & Design, 2015, 75: 113-119.

  8. Yuanfei Han, Weijie Lu, Tom Jarvis, John Shurvinton, Xinhua Wu, Investigation on the Microstructure of Direct Laser Additive Manufactured Ti6Al4V Alloy, Materials Research, 2015,18(1): 24-28.

  9. Yuanfei Han, Hongqiang Duan, Weijie Lu, Liqiang Wang, Di Zhang, Fabrication and characterization of laminated Ti-(TiB+La2O3)/Ti composite, Progress in Natural Science: Materials International, 2015, 25: 453-459.

  10. Yuanfei Han, Wei Kuang, Xiaofang Yang, Jiuxiao Li, Guangfa Huang, Weijie Lu*, Effect of La and B Addition on the microstructure and mechanical properties of titanium matrix composite, Rare Metal Materials and Engineering, 2016. 45(12): 3104-3107.

  11. Yuanfei Han, Weidong Zeng, Xiaofang Yang, Weijie Lu, Quantitative analysis of the effect of α phase morphology on mechanical property of Ti-6Al-4V alloy during hot working process, International Journal of Modern Physics B, 2015. 29: 1-11.

  12. Yuanfei Han, Weidong Zeng, Xuemin Zhang, et al. A neural network based fuzzy inference system modeling for the relationship between hydrogen content and mechanical property of Ti600 alloy, Applied Mathematical Modelling, 2013, 37 (8)5705~5714.

  13. Yuanfei Han, Colleen Bettles, Tom Jarvis, Xinhua Wu. Experimental and numerical investigation of the effect of pulse shaping on the microstructure of direct laser fabricated Ti-6Al-4V alloy. TMS 2013 142nd Annual meeting & Exibition.

  14. Yuanfei Han, Weidong Zeng, Yunlian Qi, et al., The influence of thermo-mechanical processing on microstructural evolution of Ti600 titanium alloy. Materials Science & Engineering A. 2011, 528: 8410-8416.

  15. Yuanfei Han, Weidong Zeng, Yunlian Qi, et al., Optimization of forging process parameters of Ti600 alloy by using processing map. Materials Science & Engineering A, 2011, 529: 393-400.

  16. Yuanfei. Han, Weidong. Zeng, Yu. Sun, et al., Prediction of the mechanical properties of forged Ti-10V-2Fe-3Al titanium alloy using FNN, Computational Materials Science, 2011, 50 (3): 1009-1015.

  17. Yuanfei. Han, Weidong. Zeng, Yongqing Zhao, et al., A study on the prediction of mechanical properties of titanium alloy based on adaptive fuzzy-neural network, Materials & Design, 2011, 32 (6): 3354-3360.

  18. Yuanfei Han, Weidong Zeng, Yongqing Zhao, et al., Modeling of Constitutive Relationship of Ti-25V-15Cr-0.2Si Alloy during Hot Deformation Process by Fuzzy-neural Network, Materials & Design, 2010, 31: 4380-4385.

  19. Yuanfei Han, Weidong Zeng, Yongqing Zhao, et al., An ANFIS model for the prediction of flow stress of Ti600 alloy during hot deformation process, Computational Materials Science, 2011, 50 (7): 2273-2279.

  20. Yuanfei Han, Weidong Zeng, Yu Sun, et al., The development of a database system for operational use in the selection of titanium alloy. International Journal of Minerals, Metallurgy and Materials. 2011, 18 (4): 444-119.

  21. Yuanfei Han, Weidong Zeng, Yu Sun. Quantitative microstructural analysis of Ti-6Al-4V alloy after hot forging process by means of stereological morphology. The 12th world conference on titanium. Beijing, China, 2011: 156-164

  22. Jiuxiao Li, Yuanfei Han, LiqiangWang, Liangyu Chen, and Weijie Lu,Enhanced ductility of in situ synthesized (TiB+ La2O3)/IMI834 composite by TRIPLEX heat treatment, Materials Transactions, 2016, 57(10): 1691-1697

  23. Xiaoyan Xu, Yuanfei Han, Changfu Li, Philip Nash, Damien Mangabhai, Weijie Lu, Flow behavior and processing map of forging commercial purity titanium powder compact, Journal of Materials Research, 2015, 30(8): 1056-1064.

  24. 韩远飞, 段宏强, 吕维洁, 王立强, 张荻. 非连续增强金属基复合材料剧烈塑性变形行为研究进展, 复合材料学报,2015, 32(1): 1-12

  25. 韩远飞, 孙相龙, 邱培坤, 毛建伟, 吕维洁, 张荻. 颗粒增强钛基复合材料先进加工技术研究与进展. 复合材料学报, 2017, 34(8): 1625-1635.

  26. 韩远飞, 邱培坤, 孙相龙, 王立强, 吕维洁. 非连续颗粒增强钛基复合材料制备技术与研究进展, 航空制造技术,2016, 510(15): 62-74.

 

毕业博士生数 0
毕业硕士生数 5
参加学术团体、任何职务

2017年,中国复合材料学会会员;

2016年,中国有色金属学会会员;

2016年,国际先进材料学会IAAM会员;

学术期刊审稿专家:Materials Science and Engineering A, Materials Design, Journal of alloy and Compounds, Nondestructive Testing and Evaluation, International Journal of Thermal Sciences, 稀有金属材料与工程等

 

 

申请专利

  1. 吕维洁,韩远飞,段宏强,王立强,张荻,一种采用粉末冶金制备层状结构Ti-(TiB+La2O3)Ti复合材料的方法,授权号:ZL201510067811.8

  2. 吕维洁,李九霄,韩远飞,薛晓冰,王立强,张志伟,覃继宁,张荻,以两相区钛合金为基体的超细晶钛基复合材料的制备方法,授权号:ZL201410061778.3

  3. 韩远飞,吕维洁,曹三晨,段宏强,张荻,碳纳米管增强钛基复合材料的冶金制备方法,申请号:201610510593.5

 

荣誉和奖励

  1. 2017年,陕西省优秀博士论文,省部级;

  2. 2017年,上海交通大学优秀博士后奖励计划/二等奖;

  3. 2017年,第十届华东真空学术交流会优秀论文;

  4. 2016年,上海真空科技进步奖/特等奖,排名第三;

  5. 2016年,上海交通大学SMC-晨星优秀青年学者-C类;

  6. 2016年,中国博士后国际交流计划学术交流项目

  7. 2013年,西北工业大学优秀博士毕业生;

  8. 2012年,国家建设高水平大学公派留学计划奖学金

  9. 2011年,教育部博士研究生学术新人;

 

其他
版权所有©上海交通大学材料科学与工程学院 通讯地址:上海市东川路800号 联系电话:34203098 邮编:200240