师资队伍
首页-师资队伍-教工名录
 姓名:  王晓东
 职称:  副教授
 博导/硕导:  
 所属二级机构:   相变与结构研究所
 通讯地址:  上海市闵行区东川路800号材料A楼1层
 邮编:  200240
 E-mail:  Xdwang77@sjtu.edu.cn
 联系电话:  021-54745404
从事专业: 先进高强度钢,高熵合金
学习与工作简历:

  2011.12-至今  上海交通大学材料学院 副教授

  2010.9-2011.8 美国伊利诺伊大学香槟分校 访问学者

  2006.4-2011.11 上海交通大学材料学院 讲师

  2003.4-2006.3 上海交通大学材料学院 博士

  2000.9-2003.3 河南科技大学材料学院  硕士

  1996.9-2000.7 河南科技大学材料学院  学士

 

研究方向一 先进高强度钢设计及表征
研究方向二 高熵合金性能及表征
研究情况 主持参与研究了多项国家级课题以及企业间的合作项目,主持国家自然科学基金面上项目两项,先后参与完成上海市引逼项目子课题‘高强度双相钢的组织机理及工艺研究’,国家973子课题‘高级轴承用钢的组织调控及机理’以及国家自然科学基金重点项目‘高强度钢的增塑增韧机理’研究等。
讲授主要课程 《材料科学基础》,《显微学与谱学表征》
教学研究
代表性论文、论著

  [1] Xiaodong Wang, Ruichun Luo, Fang Liu, Mingwei Chen, Characterization of Gd-rich precipitates in a fully lamellar TiAl alloy. Scr. Mater. 137 (2017) 50-54.

  [2] JunfengWang, ZhaoguangWang, XiaodongWang*, Strengthening effect of nanoscale precipitation and transformation induced plasticity in a hot rolled copper-containing ferrite-based lightweight steel. Scr. Mater. 129 (2017) 25-29.

  [3] Z.G. Wang, W. Zhou, L.M. Fu, X.D.Wang*, Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy, Mater. Sci. Eng. A 696 (2017) 503-510

  [4] Junfeng Wang, Qi Yang, Xiaodong Wang, Li Wang, Effect of coiling temperature on microstructure and tensile behavior of a hot-rolled ferritic lightweight steel, Metall. Mater. Trans. A, 47 (2016) 5918-5931

  [5] XiaoDong Wang, Jian-Min Zuo, Hefei Hu, Yonghua Rong. Direct evidence for the modulation caused by Ti substitution of Ta in a(Ta2O5)0.92(TiO2)0.08 ceramic by analytical electron microscopy, Journal of American Ceramic Society, 97 (2014) 350-353.

  [6] Yangyang Zhao, Junfeng Wang, Shu Zhou, Xiaodong Wang*,Effects of rare earth addition on microstructure and mechanical properties of a Fe-15Mn-1.5Al-0.6C TWIP steel,Materials Science & Engineering A 608 (2014) 106-113.

  [7] Huang, BX, Wang, CZ , Wang, XD, Rong, YH, Effect of nitrogen on martensitic transformation and mechanical properties of TWIP steel , Acta Metallurgica Sinica,  48 (2012) 769-774.

  [8] X.D. Wang, Z.H. Guo, Y.H. Rong. Mechanism exploration of an ultrahigh strength steel by quenching-partitioning-tempering process. Material Science and Engineering A, 529(2011) 35-40

  [9] X.D. Wang, W.Z. Xu, Z.H. Guo, L. Wang, Y.H. Rong, Carbide characterization in a Nb-microalloyed advanced ultrahigh strength steel after quenching-partitioning-tempering process, Materials Science and Engineering A 527 (2010) 3373-3378.

  [10] Xiaodong Wang, Zhenghong Guo, Yonghua Rong, Characterization of Microstructure and Mechanical Properties of a Nb-Microalloyed Steel after Quenching-Partitioning-Tempering Process, Materials Science Forum, 654-656 (2010) 90-93.

  [11] X.D. Wang, N. Zhong, Y.H. Rong, T.Y. Hsu (Z.Y. Xu), L. Wang. Novel ultrahigh-strength nanolath martensitic steel by quenching-partitioning-tempering process, Journal of Materials Research, 24 (2009) 260-267.

  [12] X. D. Wang, B. X. Huang, Y. H. Rong. On the deformation mechanism of twinning-induced plasticity steel. Philosophical Magazine Letters. 88 (2008) 845-851.

  [13] X.D. Wang, B.X. Huang, L.Wang and Y.H. Rong. The design and characterization of microalloying high-strength TRIP steels. Metallurgical & Materials Transactions A , 39A (2008) 1-7.

  [14] X. D. Wang, B. X. Huang, Y. H. Rong, L. Wang. Determination of stacking fault probability in fcc Fe-Mn-Si-Al alloy by electron diffraction. Journal of Applied Physics, 101 (2007) 093511.

  [15] X.D.Wang, B.X.Huang, Y.H.Rong, L.Wang. Transformation behavior of retained austenite in TRIP steels under stress. Journal of Materials Science and Technology, 22(5) (2006) 532-535.

  [16] X. D. Wang, B. X. Huang, Y. H. Rong, L. Wang. Microstructures and stability of retained austenite in TRIP steels. Material Science and Engineering A, 438-440 (2006) 300-305.

 

毕业博士生数
毕业硕士生数
参加学术团体、任何职务 中国电子显微学会理事,上海市电子显微学会理事
申请专利
荣誉和奖励
其他
版权所有©上海交通大学材料科学与工程学院 通讯地址:上海市东川路800号 联系电话:34203098 邮编:200240