• 2003-09 ~ 2007-03    美国新墨西哥矿业和科技学院     材料工程  博士
• 2000-09 ~ 2003-03    美国新墨西哥矿业和科技学院     材料工程  硕士
• 1996-09 ~ 2000-07    复旦大学     环境科学与工程  学士

• 2011-01 ~ 2022-10    上海交通大学轻合金精密成型国家工程研究中心  讲师
• 2010-01 ~ 2011-01    美国新墨西哥矿业和科技学院  博士后
• 2008-01 ~ 2010-01    美国西北大学  博士后

• 铝合金方面主要围绕压铸Al-Si合金的腐蚀性能改善，开发新型高强耐腐蚀压铸铝合金
• 钛合金方向主要钛合金的相变超塑性研究

在美国西北大学博士后期间，师从于相变超塑性方面的专家David C. Dunand教授，在美国波音公司钛粉末相变超塑性致密化研究项目资助下，通过实验、建模和计算机模拟研究了相变超塑性下TC4钛合金粉末致密化过程，研究结果发表在Acta Mater和Metall. Mater. Trans. A上。钛合金的研究在上海交通大学得到了学校新进教师启动计划资助。高强耐腐蚀压铸铝合金铝合金方面的研究得到美国通用公司资助。

• Yuan J, Wang Q, Yin D, Wang H, Chen C, Ye B. Creep behavior of Mg–9Gd–1Y–0.5Zr (wt.%) alloy piston by squeeze casting. Mater Charact 2013;78:37-46.
• Guo W, Wang Q, Ye B, Zhou H. Enhanced microstructure homogeneity and mechanical properties of AZ31–Si composite by cyclic closed-die forging. J Alloy Compd 2013;552:409-417.
• Ye B, Matsen MR, Dunand DC. Enhanced densification of Ti-6Al-4V/TiC powder blends by transformation mismatch plasticity. Journal of Materials Research 2013:1(doi: 10.1557/jmr.2013.95).
• Wang H, Wang Q, Yin D, Yuan J, Ye B. Tensile creep behavior and microstructure evolution of extruded Mg–10Gd–3Y–0.5Zr (wt%) alloy. Mater. Sci. Eng. A 2013;578:150.
• [2] Zhou H, Wang QD, Ye B, Guo W. Hot deformation and processing maps of as-extruded Mg–9.8Gd–2.7Y–0.4Zr Mg alloy. Mater. Sci. Eng. A 2013;576:101.
• Guo W, Wang Q, Ye B, Zhou H. Microstructure and mechanical properties of AZ31 magnesium alloy processed by cyclic closed-die forging. J Alloy Compd 2013;558:164-171.
• Liang ZX, Ye B, Zhang L, Wang QG, Yang WY, Wang QD. A new high-strength and corrosion-resistant Al–Si based casting alloy. Mater Lett 2013;97:104-107.
• Zhou H, Ye B, Wang QD, Guo W. Uniform fine microstructure and random texture of Mg–9.8Gd–2.7Y–0.4Zr magnesium alloy processed by repeated-upsetting deformation. Mater Lett 2012;83:175-178.
• Miao J, Ye B, Wang Q, Peng T. Mechanical properties and corrosion resistance of Mg–10Gd–2Y–0.5Zr alloy by hot extrusion solid-state recycling. J Alloy Compd 2013;561:184.
• Guo W, Wang Q, Ye B, Li X, Liu X, Zhou H. Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression. Mater. Sci. Eng. A 2012;556:267-270.
• 梁振兴, 叶兵(通讯作者). A380铝合金部件压铸充型、凝固过程的数值模拟. 热加工工艺 2013.（接受，稿件编号：2013013000388）
• Ye B, Matsen M, Dunand D. Finite-Element Modeling of Titanium Powder Densification. Metall. Mater. Trans. A 2012;43:381-390.
• Guo W, Wang QD, Ye B, Liu MP, Peng T, Liu XT, Zhou H. Enhanced microstructure homogeneity and mechanical properties of AZ31 magnesium alloy by repetitive upsetting. Mater. Sci. Eng. A 2012;540:115-122.
• Ye B, Majumdar BS, Dutta I. Texture development and strain hysteresis in a NiTi shape-memory alloy during thermal cycling under load. Acta Mater 2009;57:2403-2417.
• Ye B, Majumdar BS, Dutta I. Texture memory and strain-texture mapping in a NiTi shape memory alloy. Appl Phys Lett 2007;91:61918.
• 袁竭, 王渠东, 陈长江, 尹冬弟, 叶兵. 挤压铸造Mg-9Gd-1Y-0.5Zr活塞的组织与性能. 特种铸造及有色合金 2012;32:907-911.
• Zhou H, Wang Q, Chen J, Ye B, Guo W. Microstructure and mechanical properties of extruded Mg–8.5Gd–2.3Y–1.8Ag–0.4Zr alloy. T Nonferr Metal Soc 2012;22:1891-1895.
• Ye B, Matsen MR, Dunand DC. Enhanced densification of Ti-6Al-4V powders by transformation-mismatch plasticity. Acta Mater 2010;58:3851-3859.
• Ye B, Matsen MR, Dunand DC. Blended elemental powder densification of Ti-6Al-4V by hot pressing. J Mater Res 2011;26:965-969.
• Ye B, Dunand DC. Titanium foams produced by solid-state replication of NaCl powders. Mater. Sci. Eng. A 2010;528:691-697.

• 美国TMS会员  
• Metall. Mater. Trans. A和Wear等杂志论文审稿人  
• 中文核心期刊《热加工工艺》特邀编委