教师名录

梁加淼

高级工程师
所属二级机构:凝固科学与技术研究所
硕导/博导:硕导
通讯地址:上海市闵行区东川路800号材料F515室
电子邮箱:jmliang@sjtu.edu.cn
办公电话:86-21-54742214
获奖信息
  • 2019年中国电力科技进步三等奖;
  • 2015年上海交通大学教学成果1等奖。
  • 2013年上海交通大学SMC-晨星优秀青年教师奖励计划;
  • 2019年国家电网科技进步二等奖;
研究情况

先后主持国家自然科学基金面上项目、科技部国际合作项目、国家电网科技项目、上海交大-西门子燃气轮机联合研发基金以及上海交大-新南威尔士大学国际合作基金等课题。作为主要成员参与国家重点研发计划,973项目以及国家自然科学基金等课题多项。申请国家发明专利27项,授权专利14项;在Acta Materialia、Nanoscale、Metallurgical and Materials Transactions A等国际著名期刊发表论文50余篇。

论文信息
  • Yuehuang Xie, Tian Xia, Dengshan Zhou, Yifei Luo, Wei Zeng, Zhen Zhang, Jun Wang, Jiamiao Liang* and Deliang Zhang*, A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy, Nanoscale 12 (2020) 5347
  • Yuehuang Xie, Dengshan Zhou, Yifei Luo, Tian Xia, Wei Zeng, Chenguang Li, Jun Wang, Jiamiao Liang*, Deliang Zhang*,Fabrication of CoCrFeNiMn high entropy alloy matrix composites by thermomechanical consolidation of a mechanically milled powder,Materials Characterization 148 (2019) 307–316
  • Chenguang Li, Mingwei Zhang, Mianmian Ruan, Jun Wang, Jiamiao Liang*, Deliang Zhang*, A nanograins-attached and ultrathin Cu flake powder fabricated by high energy mechanical milling and dealloying, Materials Letters 265 (2020) 127432
  • Yuehuang Xie, Yifei Luo, Tian Xia, Wei Zeng, Jun Wang, Jiamiao Liang*, Dengshan Zhou, Deliang Zhang*,Grain growth and strengthening mechanisms of ultrafine-grained CoCrFeNiMn high entropy alloy matrix nanocomposites fabricated by powder metallurgy,Journal of Alloys and Compounds 819 (2020) 152937
  • Chenguang Li, Wei Zeng, Yuehuang Xie, Jun Wang, Jiamiao Liang*, Roland E. Loge, Deliang Zhang* Annealing hardening and softening of an ultrafine grained Cu-4.5vol.%Al2O3 nanocomposite, Materials Science & Engineering A 778 (2020) 139126
  • Chenguang Li, Yuehuang Xie, Mingwei Zhang, Mianmian Ruan, Jun Wang, Jiamiao Liang*, Roland E. Loge, Deliang Zhang*,Enhanced strength and toughness of bulk ultrafine grained Cu by nacre-inspired lamellar structure,Journal of alloys and compounds 826(2020)154234
  • Chenguang Li, Yuehuang Xie, Dengshan Zhou, Wei Zeng, Jun Wang, Jiamiao Liang*, Deliang Zhang*, A novel way for fabricating ultrafine grained Cu-4.5 vol% Al2O3 composite with high strength and electrical conductivity, Materials Characterization 155 (2019) 109775
  • Lei Cao, Wei Zeng, Yuehuang Xie, Jiamiao Liang*, Deliang Zhang*, Effect of powder oxidation on the anisotropy in tensile mechanical properties of bulk Al samples fabricated by spark plasma sintering, Materials Science & Engineering A 764 (2019) 138246
  • Lei Cao, Wei Zeng, Yuehuang Xie, Jiamiao Liang*, Deliang Zhang*,Effect of powder oxidation on interparticle boundaries and mechanical properties of bulk Al prepared by spark plasma sintering of Al powder,Materials Science & Engineering A,742 (2019) 305–308
  • X. Yao, Y.F. Zheng, M.Z. Quadir, C. Kong, J. M. Liang*, Y.H. Chen, P. Munroe, D.L. Zhang*, Grain growth and recrystallization behaviors of an ultrafine grained Al-0.6 wt%Mg-0.4 wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion, Journal of Alloys and Compounds 745 (2018) 519-524
  • J. M. Liang*, L. Cao, Y. H. Xie, Y. Zhou, Y. F. Luo, K. Q. Mudi, H. Y. Gao, J. Wang,Microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy joints produced by transient liquid phase bonding using spark plasma sintering,Materials Characterization 147 (2019) 116–126
  • J. M. Liang, Z. Zhang, M.T. Jia, L. Cao, C. G. Li, H.Y. Gao, J. Wang, D.L. Zhang, The microstructures and tensile mechanical properties of ultrafine grained and coarse grained Al-7Si-0.3Mg alloy rods fabricated from machining chips,Materials Science & Engineering A 729 (2018) 29–36
  • Yifei Luo, Yuehuang Xie, Wei Zeng, Jiamiao Liang*, Deliang Zhang*, Microstructure and Mechanical Properties of Ti-6Al-4V Rods Fabricated by Powder Compact Extrusion of TiH2/Al60V40 Powder Blend, Metallurgical and Materials Transactions A 50(2019)1643-1654
  • Wenjing Wang, Wei Zeng, Chenguang Li, Jiamiao Liang*, Deliang Zhang*, Microstructure and mechanical properties of ultrafine grained Cu-0.8 wt%C alloy with a bimodal microstructure produced by powder metallurgy techniques, Materials Science & Engineering A 712 (2018) 214–222
  • Tian Xia, Yuehuang Xie, Chao Yang, Wei Zeng, Zhongnan Bi, Jiamiao Liang*, Guoliang Zhu*, Jun Wang,Strengthening effects and thermal stability of the ultrafine grained microstructure of a nickel base superalloy at room and elevated temperatures,Materials Characterization 145 (2018) 362–370
  • X. Yao, Z. Zhang, Y. F. Zheng, C. Kong, M. Z. Quadir, J. M. Liang*, Y.H. Chen, P. Munroe, D.L. Zhang*,Effects of SiC Nanoparticle Content on the Microstructure and Tensile Mechanical Properties of Ultrafine Grained AA6063-SiCnp Nanocomposites Fabricated by Powder Metallurgy, Journal of Materials Science & Technology 33 (2017) 1023–1030
学术/社会兼职
  • 上海市机械工程学会粉末冶金专业委员会  委员
  • 中国通用零部件协会粉末冶金分会  会员
研究方向
  • 金属基纳米复合材料
  • 先进金属材料粉末冶金
工作经历
  • 2014-07 ~ 2014-10    新南威尔士大学  访问学者
  • 2011-02 ~ 至今    上海交通大学材料科学与工程学院  工程师
  • 2007-08 ~ 2011-11    上海交通大学分析测试中心  助理工程师,工程师
教育经历
  • 2011-09 ~ 2016-04    上海交通大学     材料科学与工程专业  博士
  • 2004-09 ~ 2007-07    中科院金属研究所     材料物理与化学专业  硕士
  • 2000-09 ~ 2004-07    东北大学     材料成型与控制工程专业  学士