• 1992-09 ~ 1995-07    大连理工大学     铸造专业  博士
• 1985-09 ~ 1988-07    大连理工大学   材料工程系   铸造  硕士
• 1981-09 ~ 1985-06    重庆大学   机械工程二系   铸造专业  学士

• 2013-11 ~ 2014-08    美国Wisconsin-Madison大学  访问教授
• 2002-08 ~ 2002-11    法国Grenoble国立理工学院法国国家科学中心GPM2实验室  访问科学家
• 2000-04 ~ 2001-03    日本工业技术研究院名古屋工业技术研究所  特别研究员
• 1997-09 ~ 2029-11    上海交通大学轻合金精密成型国家工程研究中心  教授(2002-)、博导(2003-)
• 1995-09 ~ 1997-08    上海大学钢铁冶金新技术开发应用重点实验室  博士后，副研究员
• 1988-09 ~ 1992-05    西华大学铸造教研室  讲师

• 轻合金及其成形技术、材料制备与加工
• 金属复合材料

长期从事镁合金/铝合金及其成形技术、金属复合材料的研究，提出了镁合金稀土强韧化机制，发明了多种高强韧、高塑性、耐热等高性能铸造铝合金和镁合金、系列大塑性变形成形技术等。承担国家、省部级、国际和企业合作等项目50余项。发表论文450余篇，其中，SCI、EI分别收录300余篇，SCI论文他引9000余次，中国机械工程学会金奖论文1篇，金属学报优秀论文1篇，美国TMS学会最佳论文(应用类)1篇，出版学术专著6部，申请专利120余项，授权专利82项，获2003年中国优秀发明专利奖1项、2004年上海市优秀发明专利二等奖1项，获国家科技进步二等奖1项，省部级科技进步一等奖6项、二等奖3项。

• Mahmoud Ebrahimi#, Li Zhang#, Qudong Wang*, Hao Zhou, Wenzhen Li. Damping performance of SiC nanoparticles reinforced magnesium matrix composites processed by cyclic extrusion and compression. Journal of Magnesium and Alloys, 2023, 11:1608-1617. 【https://doi.org/10.1016/ j.jma.2021.07.024】
• Jie Wei, Qudong Wang*, Huisheng Cai, Mahmoud Ebrahimi, Chuan Lei. Microstructure and impact behavior of Mg-4Al-5RE-xGd cast magnesium alloys. Journal of Magnesium and Alloys, 2024, 12:1799-1814.【https://doi.org/10.1016/j.jma.2022.06.014】
• Hua‑Ping Tang, Qu‑Dong Wang*, Chuan Lei, Bing Ye, Kui Wang, Hai‑Yan Jiang, Wen‑Jiang Ding, Xiang-Feng Zhang, Zhen Lin, Ji-Bin Zhang. Effect of cooling rate on microstructure and mechanical properties of an Al-5.0Mg-3.0Zn-1.0Cu cast alloy. Journal of Alloys and Compounds, 2019, 801: 596-608
• Qudong Wang*, Yongliang Mu, Jinbao Lin, Hans J. Roven. Strengthening and toughening mechanisms of an ultrafine grained Mg-Gd-Y-Zr alloy processed by cyclic extrusion and compression. Materials Science & Engineering A, 2017, 699: 26-30
• GUOPING LIU, QUDONG WANG*, LI ZHANG, BING YE, HAIYAN JIANG, and WENJIANG DING. Effects of melt-to-solid volume ratio and pouring temperature on microstructures and mechanical properties of Cu/Al bimetals in compound casting process, METALLURGICAL AND MATERIALS TRANSACTIONS A, 2019, 50A, (1):401-414
• Mahmoud Ebrahimi, Bangcai Luo, Qudong Wang*, Shokouh Attarilar. Enhanced multifaceted properties of nanoscale metallic multilayer composites. Materials, 2024, 17, 4004.【https:// doi.org/10.3390/ma17164004】
• HUAN WANG, CARL J. BOEHLERT, QUDONG WANG*, DONGDI YIN, WENJIANG DING. Analysis of Slip Activity and Deformation Modes in Tension and Tension-Creep Tests of Cast Mg-10Gd-3Y-0.5Zr (Wt Pct) at Elevated Temperatures Using In Situ SEM Experiments. Metallurgical and Materials Transactions A, 2016, 47:2421-2443
• Z. X. Liang, B. Ye, L. Zhang, Q. G. Wang, W. Y. Yang, Q. D. Wang∗. A new high-strength and corrosion-resistant Al-Si based casting alloy. Materials Letters, 2013, 97:104-107
• Mahmoud Ebrahimi, Qudong Wang*, Shokouh Attarilar. A comprehensive review on magnesium-based alloys and composites processed by cyclic extrusion compression and the related techniques. Progress in Materials Science, 2023,131:101016【https://www.sciencedirect.com/science/article/pii/S0079642522000974】
• Teng Liu, Qudong Wang*, Yudong Sui, Qigui Wang, Wenjiang Ding. An investigation into interface formation and mechanical properties of aluminum-copper bimetal by squeeze casting. Materials and Design. 2016, 89: 1137-1146
• H. Wang, C.J. Boehlert, Q.D. Wang∗, D.D. Yin, W.J. Ding. In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures. International Journal of Plasticity, 2016, 84: 255-276
• Hao Zhou, Guangming Cheng, Xiaolong Ma, Weizong Xu, Suveen Mathaudhu, Qudong Wang∗, Yuntian Zhu∗. Effect of Ag on interfacial segregation in Mg-Gd-Y-(Ag)-Zr alloy. Acta Materialia, 2015, 95:20-29
• D.D. YIN, Q. D. Wang∗, C.J. BOEHLERT, and V. JANIK. Creep and Fracture Behavior of Peak-Aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct). METALLURGICAL AND MATERIALS TRANSACTIONS A, 2012, 43(9): 3338-3350
• Tao Peng, QudongWang*, JinbaoLin, ManpingLiu, HansJ.Roven. Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression. Materials Science and Engineering A, 2011, 528:1143-1148
• Qudong Wang, Yongjun Chen, Manping Liu, Jinbao Lin, Hans J. Roven. Microstructure evolution of AZ series magnesium alloys during cyclic extrusion compression. Materials Science and Engineering A, 2010, 527(9): 2265-2273
• W. W. Jian, G. M. Cheng, W. Z. Xu, C. C. Koch, Q. D. Wang∗, Y. T. Zhu and S. N. Manthaudhu. Physics and model of strengthening by parallel stacking faults. Applied Physics Letters, 2013, 103: 133108-1-4
• Yongliang Mu, Qudong Wang∗, Maoliang Hu, Vit Janik, Dongdi Yin. Elevated-temperature impact toughness of Mg-(Gd, Y)-Zr alloy. Scripta Materilia, 2013, 68(11): 885-888
• V. Janik, D.D. Yin, Q.D. Wang*, S.M. He, C.J. Chen, Z. Chen, C.J. Boehlert. The Elevated-Temperature Mechanical Behavior of peak-aged Mg-10Gd-3Y-0.4Zr Alloy. Materials Science and Engineering A, 2011, 528: 3105-3112
• Y. J. Chen, Q. D. Wang, H. J. Roven, M. P. Liu, M. Karlsen, Y. D. Yu and J. Hjelen. Network-shaped fine-grained microstructure and high ductility of magnesium alloy fabricated by cyclic extrusion compression.Scripta Materialia, 2008, 58(4): 311-314
• Qudong Wang, Yinhong Wei, Wenzhou Chen, Yanping Zhu, Chunjiang Ma, Wenjiang Ding. In situ surface composites of (Mg2Si+Si)/ZA27 fabricated by centrifugal casting.Materials Letters, 2003, 57:3851-3858

• 中国机械工程学会  高级会员
• 中国材料研究学会  高级会员
• 上海金属学会  理事
• 上海有色金属协会  专家
• 上海铝业协会  专家