教育经历
- 2009年-2013年，北京科技大学 材料科学与工程学院（国际班） 学士
- 2013年-2016年，德国亚琛工业大学 地质资源与材料工程学院 硕士
- 2015年-2016年，德国亚琛工业大学 马克斯-普朗克钢铁研究所（MPIE） 硕士
- 2016年-2019年，德国亚琛工业大学 马克斯-普朗克钢铁研究所（MPIE） 博士
工作经历
- 2020年-2021年，西北工业大学清洁与可再生能源学院，副教授
- 2021年-至今，上海交通大学材料科学与工程学院，助理教授
研究方向
- 金属增材制造服役性能微观机理研究
- 梯度结构组织调控及性能优化研究
研究情况
主持国自然青基、重庆市面上、企业横向等课题十余项，作为项目骨干参与国家重点研发、NSFC航空发动机重点项目、GF173等7项。研究方向聚焦于金属增材制造高强韧性及疲劳失效等关键服役性能微观机理研究，发表论文四十余篇（第一/通讯20余篇），包含Adv. Sci., Acta Mater., Int'l J Plast. (4篇），Scripta Mater. (2篇）， MRL，JMST等。
论文信息
- D. An*, Y. Xiao, J. Yu, X. Zhang*, Z. Li, Y. Ma*, R. Li, X. Han, X. Li, J. Chen, S. Zaefferer, The Role of Dislocation Type in the Thermal Stability of Cellular Structures in Additively Manufactured Austenitic Stainless Steel, Adv. Sci. (2024) 2402962.
- D. An*, Y. Xiao, X. Liu, H. Zhao, et al., Formation of two distinct cellular structures in 316L stainless steel fabricated by micro-laser beam powder-bed-fusion. Mater. Res. Lett., 12(2024), 42-49.
- D. An*, Y. Zhou, X. Liu, et al., Exploring structural origins responsible for the exceptional mechanical property of additively manufactured 316L stainless steel via in-situ and comparative investigations, Int. J. Plast., 170(2023)103769.
- D. An*, W. Krieger, S. Zaefferer*, Unravelling the effect of hydrogen on microstructure evolution under low-cycle fatigue in a high-manganese austenitic TWIP steel, Int. J. Plast., 126(2020) 102625.
- D. An*, X. Zhang*, S. Zaefferer, The combined and interactive effects of orientation, strain amplitude, cycle number, stacking fault energy and hydrogen doping on microstructure evolution of polycrystalline high-manganese steels under low-cycle fatigue, Int. J. Plast., 134(2020) 102803.
- D. An*, S. Zaefferer*, Formation mechanism of dislocation patterns under low-cycle fatigue of high-manganese austenitic TRIP steel with dominating planar slip mode, Int. J. Plast., 121(2019) 244-260.
- D. An, T.A. Griffiths, P. Konijnenberg, S. Mandal, Z. Wang, S. Zaefferer*, Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning, Acta Mater. 156 (2018) 297-309.
- D. An*, H. Zhao, B. Sun*, S. Zaefferer, Direct observations of collinear dislocation interaction in a Fe-17.4Mn-1.50 Al-0.29C (wt.%) austenitic steel under cyclic loading by in-situ electron channeling contrast imaging and cross-correlation electron backscatter diffraction, Scripta Mater., 186(2020) 341-345.
- R. Wu, Y.T. Choi, Q. Wu, X. Liu, D. An*, T. Li*, M. Li, H. S. Kim*, Enhanced strength-ductility synergy in a gradient pseudo-precipitates heterostructured Al-2.5%Mg alloy: Design, fabrication, and deformation mechanism, J. Mater. Sci. Technol., 196(2024) 88-100.
- D. An*, X. Liu, Y. Liu, X. Li, J. Chen, Experimental investigation of dislocation-grain boundary interaction in coarse-grained high-manganese steels using quasi in situ electron channeling contrast imaging, Mater. Charact., 195(2023) 112545.
- X. Liu, Y. Zhou, J. Chen, D. An*, X. Li, J. Chen*, Comparative investigation of fatigue properties between additively and conventionally manufactured Invar 36 alloy, Int. J. Fatigue, 187 (2024) 108460.
- Y. Zhuang, D. An*, Y. Wang, S. Liang, J. Zhou, S. Li, J. Li, W. Gong*, Nano hydride precipitation-induced disappearance of yield drop in zirconium alloy at elevated temperature, Scripta Mater., 254(2025) 116342.
荣誉信息
- 中国科协青年人才托举工程