• 1988年-1992年，佳木斯工学院 铸造专业 学士
• 1994年-1996年，哈尔滨工业大学 材料加工工程专业 硕士
• 1996年-1999年，哈尔滨工业大学 材料加工工程专业 博士

• 1992年-1994年，哈尔滨第一机器制造厂铸钢分厂，技术员
• 1999年-2000年，哈尔滨工业大学材料科学与工程学院，讲师
• 2000年-2001年，上海交通大学材料科学与工程流动站，博士后
• 2001年-2011年，上海交通大学材料科学与工程学院，副教授
• 2012年-2022年，上海交通大学材料科学与工程学院，研究员

• 特种铸造
• 铝、镁合金材料开发

一直从事特种铸造（低压铸造、熔模铸造等）、有色合金熔炼、熔体净化技术等研究，发明了熔体脉冲旋转喷吹净化方法。在铝、镁合金材料开发、组织细化、性能调控方面，也做过深入研究。负责、参加和完成了国防预研、国家重点研发、航天基金、企业横向等项目40余项，研究经费2000万元，发表论文70余篇，申请专利22项，获国家级科技进步奖2项，获省部级科技进步奖6项。

• G.P. Xu, K. Wang*, X.P. Dong, L. Yang, H.Y. Jiang, et al. Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys, Metallurgical and Materials Transactions A, 2020, Online.
• K. Wang*, X. Lv, Y.M. Zhu, H.Y. Jiang*, et al. In-situ synthesis of novel Al-PO master alloy and its refinement and modification effects on Si phases in hypereutectic Al-30Si alloys, Materials Characterization, 2019, 157: 109900.
• K. Wang*, G.P. Xu, H.Y. Jiang*, et al. Development of Al-TiCN nanocomposites via ultrasonic assisted casting route, Ultrasonics sonochemistry, 2019, 58: 104626.
• K. Wang*, G.P. Xu, H.Y. Jiang*, et al. Effects of TiC0.5N0.5 nanoparticles on the microstructure, mechanical and thermal properties of TiC0.5N0.5/Al-Cu nanocomposites, Journal of Materials Research and Technology, 2020, 9(2): 2044.
• G.P. Xu, K. Wang*, X.P. Dong, H.Y. Jiang*, et al. Multiscale corrosion-resistance mechanisms of novel ferrous alloys in dynamic aluminum melts, Corrosion Science, 2020, 163: 108276.
• J. Wei, Q.D. Wang*, D.D. Yin, L. Zhang, H. Zhou, B. Ye, H.Y. Jiang, and W.J. Ding. Extra Strain Hardening in High Pressure Die Casting Mg-Al-RE Alloy, Metallurgical and Materials Transactions A, 2020, 51: 1487-1492.
• G.P. Xu, K. Wang*, X.P. Dong, H.Y. Jiang, et al. Experimental and Theoretical Research on the Corrosion Resistance of Ferrous Alloys in Aluminum Melts, Metallurgical and Materials Transactions A, 2019, 50(10): 4665-4676.
• G.P. Liu, Q.D. Wang*, Z.P. Shang, L.G. Luo, H.Y. Jiang, and W.J. Ding. An Investigation on Microstructures and Mechanical Properties of Ultra-Low Cu Layer Thickness Ratio Cu/8011/1060 Clads, Metallurgical and Materials Transactions A, 2019, 50(12): 5866-5876.
• G.P. Liu, Q.D. Wang*, L. Zhang, B. Ye, H.Y. Jiang, and W.J. Ding. Effects of melt-to-solid volume ratio and pouring temperature on microstructures and mechanical properties of Cu/Al bimetals in compound casting process, Metallurgical and Materials Transactions A, 2019, 50A, (1): 401-414.
• L. Zhang, Q.D. Wang*, W.J. Liao, W. Guo, B. Ye, W.Z Li, H.Y. Jiang, W.J. Ding. Effects of cyclic extrusion and compression on the microstructure and mechanical properties of AZ91D magnesium composites reinforced by SiC nanoparticles, Materials Characterization, 2017, 126:17-27.
• K. Wang, H.Y. Jiang*, Q.D. Wang, et al. Nanoparticle-induced nucleation of eutectic silicon in hypoeutectic Al-Si alloy, Materials Characterization, 2016, 117: 41-46.
• K. Wang, H.Y. Jiang*, Q.D. Wang, et al. A novel method to achieve grain refinement in aluminum, Metallurgical and Materials Transactions A, 2016, 47(10): 4788-4794.
• K. Wang, H.Y. Jiang*, Q.D. Wang, et al. Influence of nanoparticles on microstructural evolution and mechanical properties of Sr-modified Al-10Si alloys, Materials Science and Engineering: A, 2016, 666: 264-268.
• K. Wang, H.Y. Jiang*, Y.X. Wang, et al. Microstructure and mechanical properties of hypoeutectic Al–Si composite reinforced with TiCN nanoparticles, Materials & Design, 2016, 95: 545-554.
• K. Wang, H.Y. Jiang*, Y.W. Jia, et al. Nanoparticle-inhibited growth of primary aluminum in Al–10Si alloys, Acta Materialia, 2016, 103: 252-263.

• 轻合金研究所
• 轻合金研究所
• 轻合金研究所

• 镁合金稀土强韧化的基础研究，上海市自然科学二等奖，2016年，3/5
• 铝溶体电磁纯净化技术及其应用，国家技术发明二等奖，2006年，6/6